Glass Look
NEEMA3D™ GLASS LOOK is a crystal clear, strong, flexible and easy to print filament for 3D printing.
Added to these, very low water absorption, almost no warping, very good interlayer adhesion and flame resistant properties make it a great special filament. NEEMA3D™ GLASS LOOK is FCA (Food Contact Acceptable) approved.
- 92% light transmission
- Strong and flexible
- Almost no warping
- Good interlayer adhesion
- FCA (Food Contact Acceptable)
Glass look
Specifications
Dimensions
| Size | ø tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
Physical properties
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ASTM D792 | 1,01 g/cc |
|
MFR 200˚C/5kg |
ASTM D1238 | 7,5 g/10 min |
| Tensile strength |
ASTM D638 |
26,2 Mpa |
| Elongation at break |
ASTM D638 |
230% |
|
Flexural modulus |
ASTM D790 |
1795 Mpa |
| Instr. Dart Impact (23˚C, 3,18mm TE) |
ASTM D3763 |
40J |
|
Shore D Hardness |
ASTM D2240 |
63 |
|
Light Transmission |
ASTM D1003 |
92% |
Thermal properties
| Description | Testmethod | Typical value |
|---|---|---|
| Printing temp. | - | 235-250˚C |
| Melting temp. | ISO 294 | 177-232˚C |
| Vicat softening temp. |
ASTM D1525 |
± 85˚C |
Ultimate Packaging
NEEMA3D™ Ultimate edition is available in a custom box with transparent spool and a resealed vacuumed bag. The spool helps you to know how much filament is left at any time and with the resealed vacuumed bag you can store your filament to keep the proper humidity even after you open it!